Philips Senseo Twist HD7871/60 Service Manual

HD7871/60 / HD7871/614-11Service modeOnly in case of a reset appliance you can check it’s current settings.When connecting the appliance to the mains, you should see the On/Off light blinking very rapidlyfor 0.5 seconds. For convenience the country selection and ME/HE selection are also being displayed.1-cup button1 & 2-cup button2-cup buttonPress the indicated button after connecting the mainsBlinkingOffBlinkingOffBlinkingGeneral versionBoiler_empty_flag setFrance / Spain versionCountrySelectionME / HESelectionMid-endHigh-endSensorOn/Off button1-cup button2-cup buttonToggle buttonNTC boilerWater level sensor--On/Off LED1-cup LED2-cup LEDToggle LEDDescale LEDRegular LEDStrong LEDMemory my cup LEDButton pressedButton pressedButton pressedButton pressedNTC errorWater presentButton releasedButton releasedButton releasedButton releasedNTC okWater low--LED LED on LED offSettingsSensor&LED testBoilerresetMid-End / High-EndSelection(to enable Personal CoffeeMemory button)Country Selection(General / France-Spain)OffSettingsManual pumpcalibration(Volume adjustment)Please note, as the appliance is equipped with acapacitive touch panel as a user interface, specialattention is required to be able to enter several servicemodes. The capacitive buttons need 0,5 seconds toinitialize after the mains is connected. During thistimeslot the capacitive buttons must not be touched,otherwise you will not be able to enter the servicemodes.Service modeThe appliance is equipped with a dedicated service mode.The service mode enables you to carry out some settingsand tests.CALCOn/Off buttonRegular LEDToggle buttonStrong LEDCalc LED1-cup button2-cup buttonRepair instruction