Q CELLS Q.SMART Series Installation And Operation Manual
Also see for Q.SMART: Installation and operation manual
                 | |
4 INSTALLATION AND OPERATION MANUAL FOR CIGS SOLAR MODULES Q-CELLS SE - EUROPE - EUROPE2 PRODUCT DESCRIPTION Q.SMARTFIGURE 1: Exterior dimensions (in mm) and components for Q.SMART UF, Q.SMART UF L and Q.SMARTTECHNICAL DATA (you can find additional data in the respectively valid data sheets at www.q-cells.com)PRODUCT LINE Q.SMART UF (SL1) Q.SMART UF L (SL2) Q.SMART (SL1-F)Type unframed unframed framedArea [m²] 0.75 0.94 0.76Weight [kg] 13.2 16.5 14.5Max. system voltage Vsys [V] 1,000 1,000 1,000Max. reverse current lR [A] 4 4 4Junction box Protection class IP 65 with bypassdiodeProtection class IP 65 with bypassdiodeProtection class IP 65 with bypassdiodeConnector Multicontact MC4 (safe against accidental contact, reverse-polarity protected, resistant against UV radiationand against temperatures from -40 °C to +90°C, designed for 1000 VDC and 22 A (nominal power dependentfrom surrounding temperature)Flammability rating C C CSnow load [Pa] 2,400 2,400 5,400Wind load [Pa] 2,400 2,400 2,400Certificates All modules: CE, IEC 61646 (Ed. 2), IEC 61730 (Ed. 1) application class AQ.SMART UF Q.SMART UF L Q.SMARTComponents (rear view)1 Junction box2 Product label3 Connection cables (+) 855 +30 / -0, (-) 735 +30 / -0 mm4 Connectors (with + and - polarity)5 Grounding points (only Q.SMART)6 Drainage holes (only Q.SMART)7 Frame (only Q.SMART)76 6665 5421342134213FIGURE 2A: Module label of Q.SMART & Q.SMART UF*STC: 1000 W/m², 25°C, AM 1.5 Spectrum. Data given are rated (nominal) values.See the Installation and Operating Manual by Q-Cells for further information on ap-proved installation and use of this product.Warning: ElEctrical HazardDo not disconnect under loadQ.SMart UF l 100PrOdUctField wiring: Copper only, 14 AWG min.Insulated for 90º C min.Fire Rating Class CSafety Class llSeries Fuse: 4 Anominal Power (+5W/-0W)Short circuit currentOpen circuit Voltagecurrent at Maximum PowerVoltage at Maximum PowerMaximum System Voltage 1000 V (iEc) / 600 V (cSa/Ul)PErFOrMancE at Standard tESt cOnditiOnS*PmaxiscVocimpVmp[W][A][V][A][V]Made in GermanytHiS MOdUlE iS EnErgizEd BYManufactured for Q-cEllS SEBitterfeld-Wolfen, GermanyEMail modules@q-cells.comWEB www.q-cells.com®USC• Certified UL1703• No 244748• Master Contract: 244748FIGURE 2B: Module label of Q.SMART UF LQ.SMART UF L 115PERFORMANCE AT STANDARD TEST CONDITIONS*Nominal Power (+5 W)Measurement accuracy Pmpp*: ± 3 %Pmpp [W] 115Short circuit current I sc [A] 1.69Open circuit voltage Voc [V] 95.1Current at maximum power Impp [A] 1.54Voltage at maximum power V mpp [V] 74.7Maximum system voltage Vsys [V] 1000 (IEC)600 (CSA / UL)Weight M [kg] 16.5*STC: 1000 W/m², 25 °C, AM 1.5 Spectrum. Data given are rated (nominal) values.CertifiedUL 1703(No 251746)Series Fuse: 4 AField Wiring:Copper only, 14 AWG min.Insulated for 90 º C min.Fire Rating Class CDANGER!Risk of electric shock!DO NOT connect ordisconnect plug contactswhile system is underload current. Refer to theInstallation and OperationManual before installing,operating or servicingthis unit.49209 G1.3EMAIL service@q-cells.comWEB www.q-cells.comENGINEERED, DESIGNED, MANUFACTURED AND QUALITY TESTED BY Q-CELLS SE.Made in GermanyENGINEERED, DESIGNED AND QUALITY TESTED BY Q-CELLS SE IN GERMANY |
Related manuals for Q CELLS Q.SMART
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine