Q-See DVR User Manual
              | |
Chapter 5: DVR Setup - 5.10 Sub Menu-Password ChangeSystem default password: Press [ CH1] button six times.User needs to enter six characters for thepassword.All keys can be used as password key except the[ Menu] key, which is used to exit.Note: To Reset the DVR.Press the [Pause] button 10 times.Resetting the DVR restores all values to systemdefaults and the DVR will reboot.Afterward the default password is [ CH1]button 6 times.Q-See Q25DVR4ES User's ManualQ-See Q25DVR4ES User's ManualChapter 5: DVR Setup - 5.15 NTSC/PAL Output SelectionChange the J10 jumper on the system board to select NTSC or PAL videooutput as marked on the silkscreen of the system board.NTSC/PAL SelectPage 12Page 15Chapter 5: DVR Setup - 5.11 Sub Menu- Color SetHUE : 0-99.SATURATION : 0-99.CONTRAST : 0-99.BRIGHTNESS : 0-99.Button function :[ Up] [ Down]: moves the prompt.[REW]: Increase Value.[FWD]: Reduce Value.[CH1-CH4, QUAD]: Select Channel.[ Menu]: exit.Chapter 5: DVR Setup - 5.16 Factory ResetPress the [ SEL] Button to reload factory defaults, then the DVR will reboot, all customsettings (including password) will be restored to default.There is no confirming dialog box for this selection after you press [ SEL] button, the systemwill just reboot! |
Related manuals for Q-See DVR
manualsdatabase
Your AI-powered manual search engine