Q-See DVR User Manual

Contents

Q-See DVR User Manual Manual pdf 6 page image

Q-See Q25DVR4ES User's ManualQ-See Q25DVR4ES User's ManualCAUTION: Do not remove the cartridge while theDVR is on!CAUTION: The wedge at the end of the cartridge handle must be fully inserted intothe compartment; otherwise the cartridge will not be able to insert into the DVRfirmly, it could also cause damage by scraping the body of the DVR.Page 5 Page 22NOTE: This package comes with a 250GB hard drive. You would follow these instructions ifyou want or need to install a new hard drive.1. Slide the HDD tray out of DVR body carefully.2. Connect the power cord and data cable to hard diskdrive carefully.3. Insert the HDD tray into DVR body.4. Lock the HDD tray.Make sure the HDD is set as MASTER.Chapter 3 : Installation - 3.1 Installing Hard Drive Chapter 9: SpecificationsDVR SpecificationsEstimated Record Length 120GB Hard drive @ 7 frames per second @ Normal Quality(120*1024*1024 K byte) ( 7*15*60*60 ) = 332 HoursMethod Time Date EventSearch Full Screen YESDimension( L x W x H ) 12.25in * 5.25in * 3.25inVideo Output Channel 1 channel Composite BNCNTSC 120 frames/second 4 x 30 frames/secondDisplay Frame Rate PAL 100 frames/second 4 x 25 frames/secondNTSC Max.30 fps (Quad) Quad ModeRecording Frame Rate(Quad) PAL Max.25 fps (Quad) Quad ModeNTSC Each Channel =30fps Number of CamerasMax. 30 frames/s(Total)Recording Frame Rate(Each Mode) PAL Each Channel =25 fps Number of CamerasMax. 25 frames/s(Total)Record Mode Continuous, Time Schedule, Motion Triggered.Display NTSC 720 x 480PAL 720 x 576ResolutionRecord NTSC 320 x 112, 640 x 224PAL 320 x 136, 640 x 272Quad 640 x 224 (total)Each 640 x 224Video Compression Format(Each Channel)Modified Motion -JPEG(12-20K bytes/frame)Low : 12K ByteNormal : 15K ByteHigh : 20K ByteHDD Support Up to 500GB ATA -100 InterfaceITEM DESCRIPTION NOTEVideo Format NTSC / PALOperation System None STAND-ALONECamera Input Channel 4 channel Composite BNCUSB For PC playback & backup USB 2.0Remote Control Included