Q-See QC SERIES Setup Manual

Also see for QC-SERIES: User manual User manual User manual Quick start guide User manual

Q-See QC SERIES Setup Manual Manual pdf 11 page image

20 212.1 ADVANCED NETWORK SETTINGSNow that you’ve successfully connnected your NVR to your network and to the Internet, thereare additional features which you can take advantage of. These settings allow your NVR tosend out e-mail alerts as well as post images and records to an FTP site. In addition, you cansee which users are online, limit online access and more.PICTURE 2-1PICTURE 2-2ADDITIONAL SETTINGS CHAPTER 2ONLINE USERSA list of users accessing the NVR from overthe network or through the Internet is shownin Online Users menu which itself is found inthe Info menu.The user’s name as well as the IP addressused to access the NVR is displayed.If you have proper system management rights(Configured in Account, See Section 4.4Advanced in the User’s Manual for fullinstructions), you can disconnect or blocka user. The maximum time a user can bedisconnected is 18 hours (65,535 seconds).PICTURE 2-3PICTURE 2-4IP FILTERYou can also improve security by controlling remote access to your NVR using the IP Filter.This feature enables you to allow online users only from approved IP addresses. Up to 64addresses may be entered.Enter the trusted IP addresses into the field atthe top of the window and select Add IP toadd that address to the list of those allowedto connect to the NVR.Once this feature is enabled, only IPaddresses within this list can be used toaccess the NVR. If this feature is not enabled,then users can connect from any IP addressif they have the correct user name andpassword information.NETWORKIP AddressSubnet MaskGatewayTCP PortUDP PortPreferred DNSAlternate DNSIP Filter Trusted Sites : 0NTP windows.time.com : 24PPOEDDNS No Available DDNS SetupTransfer ModeLAN DownloadHTTP PortMax ConnectionDHCPADVANCED SETTING0 . 0 . 0 . 00 . 0 . 0 . 00 . 0 . 0 . 00 . 0 . 0 . 00 . 0 . 0 . 037777377788020LatencyDefault Save CancelThe IP Filter window is accessed throughthe Advanced Settings area of theNetwork menu.