Q-See QC SERIES User Manual

Also see for QC-SERIES: User manual User manual Setup guide User manual Quick start guide

Q-See QC SERIES User Manual Manual pdf 22 page image

42 43PICTURE 4-7PICTURE 4-8PICTURE 4-9Firmware TabYou can view the firmware version - shown asSystem Version - of the cameras connected toyour NVR.Upgrade TabYou can upgrade the firmware of your cameras -including those connected remotely.1 Download the camera firmware file on acomputer2 Load the camera firmware file onto aremoveable USB drive.3 Insert the USB drive into a port on the NVR thatis not being used by the mouse.4 Click Select and navigate to the file on the USBdrive.5 Once you’ve selected the file, click on Begin tostart the upgrade.IMPORTANT! Only upgrade acamera’s firmware to fix a problemor add a needed function! DO NOTremove the USB drive while theupgrade is taking place or you canpermanently disable the camera.IMAGEUse this submenu to adjust the video image for each camera.• Select the channel you wish to modify in Channel.Mirror - Image will be “backwards”Saturation, Brightness, Contrast, Sharpness sliders - manually adjust video image.Flip - Image will be upside down.Light - Lightens picture. Stop disables this feature.Scene Mode - Preset color settings for a variety of environments, plus user-customizable options.The Blue and Red gains may be adjusted between 0 and 100. The default is 50.Stop turns this feature off.Daylight - Preset options for changing light conditions• Colorful – Video image is shifted towards red hues.• Auto – Constantly adjusts color balance to maintain accurat colors.• B/W – Camera will only operate in black and white mode.• By Time – Color is ajusted at specific times.• Click Apply to test your settings.• Click Save before exiting this window to preserve your changes.PICTURE 4-10