Q-See QSD9004 User Manual

Also see for QSD9004 series: Setup manual Manual recording guide

Q-See QSD9004 User Manual Manual pdf 13 page image

User Manual105.2.1 Camera setupExplanation：1、The modifications will be available after clicking [APPLY] button on the bottom of the sub-menu windowsand being prompted to save and then clicking [ok] button.2、If you want to cancel the modification, click [Exit] button to exit the menu.3、When clicking [DEFAULT] button, all system default values will be reset to default value.4、System default value indicates the value pre-set at the factory.5.2.2 Record setupThe [Record Setup] menu allows you set up recording status (on/off) of each channel, it also allows yousetup recording image resolution and quality, and turn audio on/off. This menu also allows you selectrecording mode (recording after power on and scheduled recording) and recording file length.Once a channel is set to “on” the channel can record, if it is set to “off” the video from the channel will notbe recorded. Resolution options are D1, HD1 and CIF; and Quality options are Best, Good and Normal.When Audio is set to “On”, system will also record audio from the channels and will have audio output onplayback mode; if it is set to “off” you can not record audio and will have no audio output available onplayback mode.To record 24 hours a day set the Rec Mode to Always. To record on motion or a set schedule, selectTime Schedule Record and click the “Schedule” option, the Schedule interface will open as shown in (picture5-6):Go to [Main Menu Æ Camera] to set up the name displayand position display of each channel (Shown as Picture 5-3), Youcan also adjust image brightness, saturation, contrast and huesettings of each channel after entering into [Color] Menu and setup whether each channel can be previewed or not under Livedisplay and/or Recording mode.Please note that the name of each channel supports up toeight characters or four Chinese characters.Click [Main Menu] Æ[Record] to enter into [Record Setup] menu(Shown as Picture 5-5)Functions：1、The [Rec Mode] button allows you to setup recording 24hours, on motion, or on a set schedule.2、[PACK time] indicates maximum continuous time length ofrecorded files (15, 30, 45, 60 min).Below is the Color Menu where you can adjust imagebrightness, saturation, contrast and hue parameters of eachchannel.(shown as picture 5-4)Picture 5-3Picture 5-4Picture 5-5