QSTD2400 Series DVR User’s Manual3.3.4 Motion Detection RecordingThis unit supports recording channels and PTZ linking. This means it willrecord on any cameras, or trigger any speed dome to go to presets or doauto cruise once motion is detected.STEP1 Enter MOTION configuration and select camera or channelFig 3.10 Motion Detection SetupSTEP2 Put check mark in Enable Detection box first, and then enter Areato set Sensitivity and detection Area. In detection area, red means notsensitive, which will not trigger recording, transparent means available or willtrigger recording, see Fig 3.10 Motion Detection Area Setup. Sense thesensitivity can be influenced by the color and time (day or night), users canadjust its value according to the present conditions.Fig 3.10 Motion Detection Area SetupSTEP3 Enter Trigger configuration, see Fig 3.11 Trigger SetupFig 3.11 Trigger Setup17
