Q-See QSTD2404 User Manual

Also see for QSTD2404: User manual

Contents

Q-See QSTD2404 User Manual Manual pdf 43 page image

QSTD2400 Series DVR User’s ManualNotice: If a “no device” or “no file” error appears, it is possible that the USB device isincompatible. Please try another USB flash drive.Please be patient. It will take 2-3 minutes to update.5.3 Loading Default SetupThe DVR has different setup blocks, like Basic, Record, Schedule, Motion etc.Users can choose any block to restore default setup, see Fig 5.2 Reset Blocks.Fig 5.2 Reset BlocksSTEP1 Enter TOOLS configuration, refer to 4.2.10 Tools Configuration.STEP2 Click Load default. Select setup blocks; please refer to Fig 5.2 ResetBlocks.STEP3 Press OK to reset to default. It will return to TOOLS interface whenfinished.5.4 Checking System InformationTo check system information like firmware version, IP address, etc.STEP1 Press right mouse button to show the control bar. Click Menu, referto Fig 4.2 Pop up Menu.STEP2 Click Info, the window below will appear.Fig 5.3 Status InterfaceSTEP3 Click System, the window below will display. Check firmware version,39