MAIN MENU SETUP GUIDE QT426 User Manual21 | P a g e4.2.2 Host MonitorStep 1: Enter into system configurationlive configurationhost monitor; refer to Fig 4-8:Fig 4-8 Live Configuration-Host MonitorStep 2: Select split mode: 1×1, 2×2, 2×3, 3×3, 4×4 and channelStep 3: Dwell time: the time interval for a certain picture display before switching to next picture displayStep 4: Select the split mode, then setup current picture group. Click button to setup the previous channel groupsof pictures, click button to set latter channel groups of pictures.Step 5: Click “default” button to restore default settings; click “apply” button to save the settings; click “exit” button toexit current interface.NOTE: If you have dual monitors Host monitor needs to be main monitor.4.2.3 SPOTStep 1: Enter into system configurationlive configurationSPOT; refer to Fig 4-9:Fig 4-9 Live Configuration-SPOTStep 2: Select split mode: 1×1 and channel
