MAIN MENU SETUP GUIDE QT426 User Manual31 | P a g e4.5.2 MotionMotion includes two sub menus: motion and schedule.① MotionStep 1: Enter into system configurationalarm configurationmotion; refer to Fig 4-23:Fig 4-23 Alarm Configuration-MotionStep 2:Enable motion alarm, set alarm hold time which means time interval between two consecutive motion events.If there is other motion detected during the interval period which is considered continuous movement; it will beincluded in the current file, otherwise, it will be considered the start of a new motion file. Click Trigger button, a dialogbox will pop-up:Step 3: The setup steps of motion trigger are similar to alarm handling; user can refer to Chapter 4.5.1 Sensoralarm handling for more details.Step 4: Click Area button, a dialog box will pop-up shown as Fig 4-24:Fig 4-24 Motion-Area
