Q3 ENERGIE QX3 Series Installation And Operating Instructions Manual
                                                                                                             | |
Contents
| 
_____________________________________________________________________________________________Q3 ENERGIE Installation and operating instructions QX³ series 73/109Version 1.0, Stand 27.04.2015Installation and operating instructionsQX³ series5.4 Display settings, operating values and measured valuesYou can see the menu structure of the main menu in the table below.Main Menu:No. Menu Function1 Measured values Measurements of the current inverter2 Yields Yield data of the current inverter3 Information Logbook and system info of the inverter4 Group devices Group values of the inverter group, or values of a singleinverter within the group5 Configuration 1 Provides configuration settings of the inverter6 USB-Stick² Saving measured values, system backup, system recovery orsoftware update7 Reset PIN² Saving measured values, system backup, system recovery orsoftware update1 See Chapter 6.3 "Configuration"² See Chapter 6.5 "Backing up data, system recovery and inverter update"5.4.2 Measurement valuesIf you select the item “measured values” in the main menu, the menu shown inthe table will open.Measured values 1:No. Menu Function1 Total power Displays the current total power of the system2 Normalized power Displays the normalized power to maximum power3 PV power Displays the power for every DC string4 PV voltage Displays the voltage for every DC string5 PV current Displays the current for every DC string6 Grid power Displays the power (feed-in) in the grid7 Mains voltage Displays the grid voltage at the connection point8 Mains current Time Displays the current in or out of the grid9 Insulation resistance Displays the insulation resistance10 Mains frequency Displays grid frequency11 Temperature * Displays the outdoor temperature12 Radiation * Displays the measured radiation1 You can navigate through the measured values using the arrow keys.* Requires a temperature/radiation sensor (optional) |
manualsdatabase
Your AI-powered manual search engine