_____________________________________________________________________________________________Q3 ENERGIE Installation and operating instructions QX³ series 84/109Version 1.0, Stand 27.04.2015Installation and operating instructionsQX³ series6.2.3 LocationYou can also set the unit and the amount of remuneration per kWh here.Setting the location:Field FunctionName Name of the inverterShort name Short name of the locationLocation Name of the locationDescription Additional informationRemuneration factor Feed-in remuneration in remuneration currency/kWhRemuneration currency Currency defined for remuneration: e.g. EUR, USD, …AC energy meter calibrationfactorIf there is an optional electricity meter (S0) connected, then anenergy meter correction can be carried out. (Factory setting 1.0)Yield meter calibration offset You can use this offset to correct the meter reading if an inverteris replaced (see Chapter 9.3 Replacing an inverter).Country Select the country of your location from the list.
