L–000867(A) 3–33 – Controls and IndicatorsPrinterTest results print automatically at the end of the testing cycle. The printer is located on the top panel ofthe instrument, on the right side. Samples of test results printouts are shown in Section 4 – Operation. SeeFigure 6 for the printer’s location. See Figure 7 for printer controls.To access printer controls, lift the rear of the printer panel and remove it from the unit.Paper Release LeverThe paper release lever is located on the right side of the printer. Pull the lever forward to enable load-ing paper. When the lever is forward, the manual advance wheel (below) is operational. Push the levertoward the rear to lock the paper in place.Manual Advance WheelThe manual paper advance is located on the right side of the printer. It is a knurled wheel. Rotate thewheel toward the rear to advance paper when loading. Rotate the wheel forward to retract paper (forexample, to unjam a paper jam).Paper Release LeverManual Advance WheelFigure 7 – Printer Controls
