QBC Diagnostics Star Operators & Service Manual
                                                                 | |
Contents
| 
QBC STAR™ System User’s Manual3–4 L–000867(A)Floppy Disk DriveThe fl oppy disk drive is used primarily for software updates. It is located on the front panel of the instrument,at bottom right. To access the drive, fl ip the top of the access door downward. Disks should be insertedwith the shutter fi rst and the label upward. See Figure 8 for disk controls and indicators.Floppy Disk IndicatorThe Floppy Disk Drive Indicator light is toward the left side of the drive below the insertion slot.When off, it indicates that no activity is occurring in the drive. When on or fl ashing, it indicates thatthe disk drive is accessing a fl oppy disk. Do not attempt to eject a floppy disk while this indica-tor is lit.Floppy Disk Eject ButtonThe fl oppy disk drive eject button is located toward the right side of the drive below the insertion slot.When a fl oppy disk is inserted fully into the slot, this button extends itself. To remove a disk, fully depressthe eject button. Do not attempt to eject a fl oppy disk while the fl oppy disk indicator is litFigure 8 – Floppy Disk Drive Controls and Indicators |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine