QERIDOO Sportrex1 2019 User Manual

QERIDOO Sportrex1 2019 User Manual Manual pdf 14 page image

14 – 08|2019 – Subject to change. Sportrex 2019 Updatef Slide the leaf spring cover onto the slide holder as shownin the picture.f Be sure that the fixing mechanism locks audibly.f Repeat the procedure on the other side of the trailer.Installing the head protectorsThe head protectors serve as additional side protection in case the trailer should tip over.f Be sure that the slide covers for the head protector are fixed and tightened on both sides.f Slide the head protector onto the slide holder as shown inthe picture.f Be sure that the fixing mechanism locks audibly.f Repeat the procedure on the other side of the trailer.Mounting the push handleThe push handle is secured to the top of the cabin frame with two robust tube clamps. It has multipleheight settings and is used for pushing, pulling and manoeuvring your Sportrex.f Prepare the push handle by fully unfolding it. To do this, keep the light grey pushbuttons pressed onboth sides, see „Adjusting the push handle“ on page 21.f Position yourself behind the upright cabin.f Loosen the two star grip screws at the bottom end ofthe push handle to enable the tube clamps to be easilypushed onto the tubes of the cabin frame.f Insert the pipe clamps through the both slots in the cover.f With both tube clamps, hold the push handle on the tubesof the upper cabin frame.f Attach the tube clamps in turn onto the cabin frametubes by applying gentle pressure. Secure them by partlytightening the star grip screws.f Align the push handle horizontally by pushing the tubeclamps all the way up at the same height.f Securely tighten the star grip screws in order to fix thetube clamps to the cabin frame.Tightening the backrestThe stable backrest is an important safety element. The belts must always be tight under the seat andbehind a cabin for a good grip.Assembly