Sportrex 2019 Update Subject to change. 08|2019 – 23UtilisationTip!Carry the buggy wheel e.g. in the storage space in order to allow you to use the Sportrexflexibly at your destination. Instructions for re-mounting it can be found in the chapter„Installing the buggy wheel“ on page 17.Setting the wheel so that it turns freely (Buggy mode)It must be possible for the wheel to move freely through 360° in order to manoeuvre in Buggy mode.f Push up the mode switch to release the wheel.Securing the wheel (Walker mode)In Walker mode, the wheel must not be at an angle to the direction of travel. You must lock the wheel torun straight ahead in order to prevent abrupt blocking.f Push down the mode switch to make sure the wheel is running straight.f Turn the positioned wheel backwards until it engages audibly.Insert tow barThe tow bar can either be brought forward into the attachment position or carried along backwards inthe standby position. Pay attention also to the instructions in the chapter „Mounting the tow bar“ onpage 18.Danger!Wrap the retaining strap of the tow bar around the tow bar several times to ensure it doesnot hang down in the standby position. Otherwise it could become trapped on obstacles.Using the pennantThe pennant must be attached in Trailer mode, see „Inserting the pennant“ on page 15. For safetyreasons, we also recommend this for the other modes.Attaching the hand strapIn Buggy and Walker mode, the hand strap secured to the push handle must be attached to your wristduring every journey.Putting on the 5-point safety harnessIn every mode, the 5-point safety harnesses must be properly adjusted and every child must be fastenedin, see „Mid sitting position (Sportrex2)“ on page 26.Securing the loadLoading the baggageLoading the storage spacef Undo the Velcro fasteners of the storage space cover and lift it.f Pack larger items such as bags, toys or coats in the storage space.f Close the cover carefully.