Gigabit Switch60Apply Click Apply to save your changes to the switch.3.3.8.2 STP Port SettingThis page allow user to configure general setting of STP port and browser CIST port status.Click Switching → STP → STP Port Setting.The following table describes the labels in this screen.LABEL DESCRIPTIONPort Select Select the port(s) to change spanning tree protocol settings for.Path CostPath cost is the cost of transmitting a frame on to a LAN through that port. It isrecommended to assign this value according to the speed of the bridge. Theslower the media, the higher the cost. Entering 0 means the switch willautomatically assign a value.Edge PortSet the edge port configuration: No: Force to false state ( as link to a bridge). Yes: Force to true state ( as link to a host).P2P MAC Set the Point-to-Point port configuration: No: Force to false state.
