Gigabit Switch69The following table describes the labels in this screen.LABEL DESCRIPTIONPort Select the setting portsStateSelect the state of setting Disable: Disable the storm control function. Enable: Enable the storm control function.ActionSelect the state of setting Drop: Packets exceed storm control rate will be dropped. Shutdown: Port exceed storm control rate will be shutdown.Storm TypeSelect the type of storm controlBroadcast: Broadcast packet Unknown Unicast: Unknown unicast packet Unknown Multicast: Unknown multicast packetRateValue of storm control rate, Unit: pps (packet per-second) or Kbps(Kbits per-second) depends on global mode setting.The range is from 0 to 1000000.Apply Click Apply to save your changes to the Switch.3.5.2 Protected PortsThis page allow user to configure protected port setting to prevent the selected ports fromcommunicate with each other.
