40TD-000472-00-BOutput Channel – LimiterThe Limiter keeps the audio level from going above the set Threshold.Home Select theAux BankTouch aSelect ButtonSelectLimiter TabLimiterAux OutputsAux 1 MainorRefer to — Figure 341. Limiter Tab – Selects the Limiter screen2. In – RMS input level3. Out – Output level4. NR – Gain Reduction – indicates how much the signal is being reduced by the Limiter.5. Limiter Nraph – When the Limiter is engaged, the trace is blue.• Threshold (A)• Ratio (B)• Attack time (A to B)• Release time (B to C)• Vertical scale = dB6. Threshold Slider – Sets the point at which the Limiter will begin to reduce signal level.7. Ratio Slider – Sets the ratio of input level to output level when the signal exceeds thethreshold.8. Attack Slider – Adjusts how quickly the Limiter reacts to a signal that exceedsthe threshold.9. Release Slider – Adjusts how quickly the Limiter stops Limiting when signal falls below the Threshold.10. Limiter In Button – Engages or disengages the limiter.11. Knee In Button – Engages or disengages the Knee. The Knee provides a smoother transition from the Attack to the Release. — Figure 34 showsthe knee engaged.12. Simple Button – Turns the Simple mode on and off. Hides all controls except:• Limiter In button• Simple button• Reset button• Limiting (Threshold) knob13. Reset Button – Sets all the Limiter controls to their factory default position.— Figure 34 —678910 11 12 1312345A CB
