+7(495) 797-3311 www.qtech.ruМосква, Новозаводская ул., 18, стр. 136552.2 ULPP Configuration Task ListCreate ULPP group globallyConfigure ULPP groupShow and debug the relating information of ULPP1. Create ULPP group globally2. Configure ULPP groupCommand ExplanationULPP group configuration modepreemption modeno preemption modeConfigure the preemption mode of ULPP group.The no operation deletes the preemption mode.preemption delay no preemption delayConfigure the preemption delay, the no operationrestores the default value 30s.control vlan no control vlanConfigure the sending control VLAN, nooperation restores the default value 1.protect vlan-reference-instance-list>no protect vlan-reference-instance-list>Configure the protection VLANs, the no operationdeletes the protection VLANs.flush enable macflush disable macEnable or disable sending the flush packetswhich update MAC address.flush enable arpflush disable arpEnable or disable sending the flush packetswhich delete ARP.description no description Configure or delete ULPP group description.Port modeulpp control vlan -list>no ulpp control vlan -list>Configure the receiving control VLANs, nooperation restores the default value 1.ulpp flush enable maculpp flush disable macEnable or disable receiving the flush packetswhich update the MAC address.ulpp flush enable arpulpp flush disable arpEnable or disable receiving the flush packetswhich delete ARP.Command ExpalnationGlobal modeulpp group no ulpp group Configure and delete ULPP group globally.
