QUBINO FLUSH SHUTTER ZMNHOD1 User Manual
Also see for FLUSH SHUTTER ZMNHOD1: User manual
                                         | |
Contents
| 
EN.8. Z-Wave InclusionAUTO-INCLUSION1. Enable inclusion mode on your Z-Wave controller2. Connect the module to the power supply (with the temperature sensor already connected*).If the sensor is not connected before the connection of the power supply it will not work.3. Auto-inclusion will be initiated within 5 seconds of connection to the power supply and themodule will automatically enrol in your network*the temperature sensor is sold separately |
manualsdatabase
Your AI-powered manual search engine