Qeedji SLATE Series User Manual
                                                    | |
1.6.1 Features summaryPicture update with Spe DesktopThe SLATE106 device can be used in Spe Desktop mode. The full screen .ppk picture to display can be generated through the USB mass storage thanks to theSPE_Desktop tool present on the file system. For further information, refer to the chapter Spe_desktop tool orPicture update with a picture drop through USBThe full screen .ppk picture to display can be generated through the USB mass storage with a simple *.ppk picture dropped from your MS-Windows computer to yourSLATE106 device. In this case, other .ppk file names than spe.ppk are supported.☛ An img2ppk.exe tool is provided to create some .ppk picture from any .PNG or a BMP picture in the 800x600 resolution (for further information, visit the QeedjiSupport Web site https://www.qeedji.tech)Picture update when paired to a SMH300 hubWhen paired to SMH300 hub, the full screen .ppk picture to display, the application configuration file and the software release are provided by the hub device throughthe WPAN1 .◬ Do not execute the APPLI.HTA application to configure the SLATE106 device when it is paired to a hub, except to repair a SLATE106 configuration.◬ To support the Right key press detection for Check Out button and , and Left key press detection for Check In , both the vibration detection and the touch keydetection need to be activated in the SMH300 hub. For further information, refer to the SMH300 User manual on the Web site https://www.qeedji.tech.Message Overlay: partial update with a message when paired to a mobileWhen paired to a mobile, the Slate Message Overlay mobile application is able to send a message through WPAN2 , which is then displayed in overlay over the full screen.ppk picture in a predefined area and for a programmable duration (for further information, refer to the chapter Slate Message Overlay applicationSecondary picture: picture update by a key pressIs is possible to display some alternative full screen .ppk pictures by pressing simply a key on the SLATE106 device. For further information, refer to the chapterSecondary picture display.System configurationThe Pictureframe application configuration parameters are stored in the configuration file APPLI.CFG . For further information, refer to the chapter APPLI.CFGconfiguration file .The configuration file APPLI.CFG can be modified:through USB mass storage by executing APPLI.HTA . For further information, refer to the chapter APPLI.HTA configuration tool orthrough WPAN1 if the device is paired to with a SMH300 hub. For further information, refer to the SMH300 User manual on the Web site https://www.qeedji.tech.Only the reset PIN code for WPAN2 (mobile aplication) and the Date & Time can by modified by the Slate Maintainer mobile application. For further information, referto the chapter Slate Maintainer application (RFU).Application behaviour customizationOnce woken-up, the Pictureframe application launch sequence of actions. After these actions have completed, the Pictureframe application returns in sleep state. Thisactions sequence can be customized in the wake-up source versus actions matrix (for further information, refer to the chapter Actions matrix configuration).◬ Except to activate the secondary picture display feature, it is not recommended to modify this matrix configuration without a Qeedji support validation. Indeed somematrix combinations values may prevent the SLATE106 to work properly.15 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine