1.6.7 Software releaseWhen paired to a SMH300 hub, the SLATE106 is able to install a new software release provided by the hub.A minimum available free space of 220 KB is required on the USB storage to warranty the SLATE106 software upgrade.If not paired to a SMH300 hub, it is possible to trig a software release upgrade:Plug the SLATE106 device to a computer with an USB cable (*micro USB type B to USB) and wait for the USB mass storage is mounted properly,Copy the software file pictureframe-slate106-setup-1.11.10.rpk. If you have not, download the lastest Pictureframe version on the Web site www.qeedji.techEject properly the USB mass storage,Wait for about 3 minutes the time for the SLATE106 device to reboot and install the new software release (the left red LED is blinking during the installation),Wait for a while so that the USB mass storage is mounted back again. The software upgrading has completed.39