1–Switch Management ClassesQLGC_FCSwitchSettings : CIM_FCSwitchSettings1-18 59223-03 EQLGC_FCSwitchSettings :CIM_FCSwitchSettingsThere will be one instance of FCSwitchCapabilities representing the configurationof the switch hosting the CIMAgent.Supported Properties and MethodsInstanceIDOpaque IdentifierElementNameProperty will contain the string “FC Switch Settings”PreferredDomainIDProperty will contain the configured domainID. The configureddomainID will match the Active domainID if the value ofDomainIDLocked property is TRUE. This property may be edited if thevalue of the related FCSwitchCapabilities.EditPreferredDomainIDproperty is TRUE. The value must be within the range expressed bythe FCSwitchCapabilities.MinDomainID andFCSwitchCapabilities.MaxDomainID.DomainIDLockedProperty will contain the configured DomainIDLocked setting. If TRUE,the switch MUST use the PreferredDomainID, and domainID conflictswithin a fabric are resolved by segmenting the fabric. If FALSE, theswitch will use the preferred domainID where possible, and fail over toan available domainID in the event of a domainID conflict. Thisproperty may be edited if the value ofFCSwitchCapabilities.EditDomainIDLocked property is TRUE.PrincipalPriorityProperty will contain an enumerated principal priority configuration forthe switch. Valid values for this property are reported by thePrincipalPrioritiesSupported property of the correspondingFCSwitchCapabilities instance.Possible values are: 2-Principal: (FC-SW2)Switch_Priority=1 3-Subordinate: (FC-SW2)Switch_Priority=255 4-Any: (FC-SW2)Switch_Priority=254