59223-03 E A-1A AppendixThis Appendix describes the following SLP support, advertised profiles, statechanges, limitations, HTTP operations, and Fibre Channel Transparent Mode(FC-T mode).SLP SupportSLP (SA) support is integrated into the CIMAgent. As long as the switch is turnedon and the CIM service is enabled, the CIMAgent will advertise its' presence andrespond to requests for service. Ipv6 support was added as defined in RFC 3111.The SA will advertise it's presence via multicast on IPv4 and IPv6 as well as IPv4broadcast.Advertised Profiles Service Fabric Switch Record logSub profiles are not advertised via SLPLimitationsLimitations No support for SPI attribute in SrvRqst message. The CIMAgent will dropany request containing SPI information. No support for the Predicate attribute in the SrvRqst message. The attributeis ignored. The SrvTypeRqst is not supported. The CIMAgent will drop this request.State ChangesIn the event of an IP address change, or if SSL is enabled or disabled, the serviceadvertisement will change. The CIMAgent will let all existing DA registrationsexpire, and re-register the new information with all known Discovery Agents (DA).If the CIMAgent is disabled, or the switch is shut down; no SrvDeReg will be sent,instead the registration is expected to timeout.
