Qlogic QLE2360 User Manual

Contents

Qlogic QLE2360 User Manual Manual pdf 12 page image

2 – QLE2360/2362Installation in the Computer2-2 PX2454601-00 CQ2.1.1LEDsFigure 2-2 identifies and describes the activity of the QLE2360/2362 HBA LEDs.The red LED on the bracket is not used. For more information about the beaconLED activity, see the SANsurfer FC HBA Managers User’s Guide (FS0054601-00).Figure 2-2. QLE2360/2362 HBA LED Activity2.2Installation in the ComputerBefore you install the QLE2360/2362 HBA in your computer, you need the following:■ A screwdriver (usually a Phillips #1)■ One (QLE2360) or two (QLE2362) optical multimode cables with LC-style duplexconnectorsCAUTION! The QLE2360/2362 HBA contains parts that can be damaged by ESD.Before handling the QLE2360/2362 HBA, use standard methods todischarge static electricity. Keep the QLE2360/2362 HBA in theantistatic bag until you are ready to install it. Place the HBA on the bagwhen you examine or configure it. Retain the bag for future use.Activity Green LED Amber LED Red LEDPower Off Off Off OffPower On (BeforeFirmware Init)On Off OffOnline, 1Gb/s linkestablishedOne flashevery 4 Sec.Off Off1Gb/s activity One flashevery 4 Sec.On OffOnline, 2Gb/s linkestablishedTwo flashevery 4 Sec.Off Off2Gb/s activity Two flashevery 4 Sec.On OffPower On (AfterFirmware Initand/or Loss ofSync)On Off OnFirmware Error Error Code Error Code OnBeacon Flash Flash FlashGREEN LEDAMBER LEDJ1 CONNECTORJ2 CONNECTORJ1 CONNECTOR LEDsJ2 CONNECTOR LEDsGREEN LEDAMBER LEDRED LEDRED LED