12 – Call Home ConfigurationConfiguring the Call Home Service59183-02 A 12-5A12.2Configuring the Call Home ServiceEnter the Set Setup Callhome command to configure the Call Home service asshown in the following example. Refer to Table 14-22 for a description of the CallHome service configuration entries.SANbox (admin) #> set setup callhomeA list of attributes with formatting and current values will follow. Enter a newvalue or simply press the ENTER key to accept the current value. If you wish toterminate this process before reaching the end of the list press 'q' or 'Q' and theENTER key to do so.If either the Primary or Secondary SMTP Servers are enabled, the FromEmailAddressattribute must be configured or the switch will not attempt to deliver messages.Current Values:PrimarySMTPServerAddr 10.0.0.1PrimarySMTPServerPort 25PrimarySMTPServerEnable FalseSecondarySMTPServerAddr 10.0.0.2SecondarySMTPServerPort 25SecondarySMTPServerEnable FalseContactEmailAddress nobody@localhostPhoneNumber StreetAddress FromEmailAddress nobody@localhostReplyToEmailAddress nobody@localhostThrottleDupsEnabled TrueNew Value (press ENTER to accept current value, 'q' to quit):PrimarySMTPServerAddr (dot-notated IP Address) :PrimarySMTPServerPort (decimal value) :PrimarySMTPServerEnable (True / False) :SecondarySMTPServerAddr (dot-notated IP Address) :SecondarySMTPServerPort (decimal value) :SecondarySMTPServerEanble (True / False) :ContactEmailAddress (ex: admin@company.com) :PhoneNumber (ex: +1-800-123-4567) :StreetAddress (include all address info) :FromEmailAddress (ex: bldg3@company.com) :ReplyToEmailAddress (ex: admin3@company.com) :ThrottleDupsEnabled (True / False) :Do you want to save and activate this Callhome setup? (y/n):
