Qu-Bit Electronix Nebulae Manual Manual

Also see for Nebulae: Manual

Qu-Bit Electronix Nebulae Manual Manual Manual pdf 12 page image

9. Audio InputsStereo Audio Inputs. When nothing is connected to the right input, the left input will normal to the right input.When set to file source this is used as an FM Input for the grains being generated.10. Audio OutputsStereo Audio Output.10Vpp.11. RecordPressing record for the first time creates a new buffer that ends when record is disabled or 5 minutes have passed(You can make this initial recording from a live input source or from a file). The input to the buffer is controlled bythe blend control, and will be filled with the audio that is heard at the time of recording. This includes all knob turnsand CV controls, excluding speed, start, and size.Once the buffer is looping it’s possible to punch in at any moment and record the output back into the buffer, replacingthe existing material (Record your loop backwards with no additional input to have it play backward when set tooriginal speed).Once an overdub has completed, original pitch and speed will reset, guaranteeing that you hear what you were justrecording.Recording will automatically disable itself at the end of a full overdub pass.To clear the buffer hold file and press reset.To accurately calculate the anticipated size of a new buffer, the speed, start and size controls are locked duringnormal recording.12. FileThis advances the currently selected audio file to the next audio file.The order of succession is defined by the File Selection Mode in the secondary controls menu.This control is inactive when set to Live Source.13. SourceSwitches between File Source and Live Source.Holding this button provides temporary access to the Secondary Control Menu.12