Qu-Bit Electronix Nebulae Manual Manual

Also see for Nebulae: Manual

Qu-Bit Electronix Nebulae Manual Manual Manual pdf 13 page image

14. ResetResets the playback position to the currently selected loop start point.15. FreezePauses the current playback position while retaining the frequency and spectral characteristics of the audio.This is a latching control.The Button LED will be illuminated when the buffer is frozen.16. PulseA 5V gate emits from this output whenever the loop resets.Edit FunctionsThese commands are executed when holding the File button and pressing another button.Reload FilesReload files by holding File and pressing Source. (Note: Source is a falling edge sensitive button) .Reload files from a USB drive and restart the currently selected instrument file.Buffer EraseErase the buffer by holding file and pressing reset.Upon erasing the buffer the reset LED will blink five times to indicate that the buffer has been cleared.SecondaryA secondary set of controls is accessible when holding down the source button.Once the source button has been held for 250 ms, the LEDs will shift to display the state of the secondary settings.With source pressed down, pressing any of the other buttons or turning the knobs will affect the secondary controls.Releasing the source button returns the controls back to their primary functions.CV and gate inputs will continue to affect the primary controls even while source is being held.13