Quadra-Fire 43M-ACC-MBK Owner's Manual

Also see for 43M-ACC-MBK: Owner's manual Installation manual Owner's manual Owner's manual Installation manual

Quadra-Fire 43M-ACC-MBK Owner's Manual Manual pdf 35 page image

September 1, 2008 7037-135E Page 54300 Wood Stove Series (ACC)RD. Baffle Removal1. Remove all ash from the firebox, and extinguish all hotembers before disposal into a metal container.2. The baffle board has 2 pieces. With the ceramic blanketstill in place, slide one baffle piece over the top of other oneand pull out top piece through the door opening and thenremove bottom baffle piece. Figure 35.1.. Remove the ceramic blanket.4. Re-install the baffle pieces one piece at a time. Be surethe baffle boards are even with the front manifold tube andis resting on all tubes. Figure 29.1 on page 29.5. To re-install the ceramic blanket, it is easier to fold it inhalf first. Place on top of baffle board, open up and flattenand smooth out the blanket. Re-check the baffle board forcorrect positioning. Figure 35.2.Figure 35.1 - BaffleFigure 35.2 - Ceramic BlanketE. Snap Disc ReplacementMagnetSpadeConnectorsSnap DiscFigure 35.31. Locate the snap disc bracket assembly at the bottom leftrear corner of the stove. Figure 35. 3.2. A magnet holds the bracket to the stove. Pull the bracketdown away from the stove to expose the snap disc.. Pull the snap disc and spade connectors up and out ofbracket as shown in Figure 35.4.4. Using a Phillips head screw driver, remove the 2 screwsfrom the snap disc and then remove the snap disc fromthe spade connectors. Replace with new snap disc andre-connect to spade connectors.5. Push the snap disc and spade connectors back insidebracket and re-attach the bracket to the stove.Snap Disc LocationFigure 35.4