Quadra-Fire 5100 ACC Installation Manual

Also see for 5100 ACC: Owner's manual Installation manual Owner's manual

Contents

Quadra-Fire 5100 ACC Installation Manual Manual pdf 18 page image

18 7047-910 October 14, 20135100 I-ACCCorner BracketsFigure 18.4Figure 18.3Secure 2 Side Surrounds toTop SurroundFigure 18.5SURROUNDATTACH POINTSSTOVE TOPRemove 2 screws from both sides.Adjust the legs up or down to levelappliance.Figure 18.1Attachment Bar Chimney Mounting Bar5/16 NutsAttachmentBar5/16 BoltsFigure 18.2D. Leveling Legs1. Remove the 2 screws already installed on each leg.2. Move legs to the desired height.3. Re-install the screws to secure in place.E. Securing Appliance to Stove Pipe/Liner1. Once you have the appliance in place and secured, reachup through the flue opening and grab the attachment barand pull down inside flue opening. Figure 18.2.2. Insert the 5/16 bolts inside the cast flue and through thechimney mounting bar. Securely tighten the nuts. Fas-teners are provided.3. Re-install the tube channel assembly, baffle board,ceramic blanket and baffle protection channel.F. Surround & Trim Kit Installation1. Lay surround face down on a protected surface to pre-vent scratching.2. Using a Phillips head screw driver attach the side sur-rounds to the top surround using 2 #8 sheet metal screwsprovided with the kit. Figure 18.3.3. Lay the trim face down and place the corner brackets intoposition.4. Using a standard flat screw driver tighten the cornerbrackets. Figure 18.4..5. Slide the trim over the surround set.6. Install the surround set and trim set to the outer can.Place the hook in the surround sides over the surroundattachment screws, 2 on each side. Figure 18.5.7. Place top on top of appliance.