Quadra-Fire EXCURSION-I Installation Manual

Also see for EXCURSION-I: Owner's manual

Contents

Quadra-Fire EXCURSION-I Installation Manual Manual pdf 21 page image

21Quadra-Fire • EXCURSION-I, EXCURSION-II, EXCURSION-III Installation Manual • 2538-980 Rev. E • 5/19B. Using Vertical RestrictorEXHAUSTAIRVENT PIPETERMINATIONCAPINLET AIRVENT PIPEV = 10 FT. MINIMUM50 FT. MAXIMUMNOTE: TO ACHIEVE OPTIMUM PERFOR-MANCE OF INSERT, MINIMIZE OR AVOIDBENDS IN EXHAUST VENT PIPE.EXHAUSTCOLLARINLETCOLLARV=10 ft. - 25 ft. No adjustment needs to be done.26 ft. - 35 ft. Open 1 restrictor opening.36 ft. - 50 ft. Open both restrictor openings.1 2FRONT VIEW SHOWS RESTRICTORS IN THE OPEN POSITION AND BENT AT 90ºRESTRICTOR DOORSFigure 5.3 Firebox BaffleTo open restrictors, push the restrictor doors upward.The restrictor doors should be bent at a 90°. See Figure5.3.Figure 5.2 Min. / Max. Venting RequirementWhen 20-25+ feet of vertical venting is used, verticalrestrictors will need to be adjusted. See Figure 5.2 and5.3.Opening restrictors will help reduce cold start issues(cycling).Appliance - 25 in. & 30 in.V=10 ft. - 20 ft. No adjustment needs to be done.21 ft. - 35 ft. Open 1 restrictor opening.36 ft. - 50 ft. Open both restrictor openings.Appliance - 35 in.