Quadra-Fire MTV-E2-CSB Owner's Manual

Also see for MTV-E2-CSB: Installation manual Owner's manual Owner's manual Installation manual Installation manual

Quadra-Fire MTV-E2-CSB Owner's Manual Manual pdf 6 page image

6 7080-132J January 8, 2016MT. VERNON E2D. Quick Start GuideJ 8 2016Run Set UpPrime1. Empty Firebox2. Add pellets and close lid3. Turn DIAL to OFF4. Plug in the appliance• Exhaust blower will run for about 45 Seconds (wait for it to stopbefore priming)• Green light will start flashing5. Ensure thermostat is connected properly per included instructions.1. After the exhaust blower has stopped; quickly turn the dial from OFF to HItwo times• The LIGHT will turn solid green and pellets will feed. Wait for 2 minutes• If the LIGHT did not turn solid green:- Turn dial back to OFF- Unplug appliance, plug it back in and repeatPriming is only needed for first fire or starting fire on empty hopper.Note: The prime function is only required during initial set up of the unit,or after the unit has alarmed out due to an empty hopper. Priming whileunder normal operating conditions will cause the firepot to overfi ll.HEATSETTINGHEATSETTINGOFF HILOHEATSETTINGHEATSETTINGOFF HILOHEATSETTINGHEATSETTINGOFF HILO2. Choose Setting:LO – HI*Green LIGHT will be-gin flashing and stovewill startIt may take as long as 10minutes to achieve a firein the firepot. Turning theknob or thermostat to offduring this time will inter-rupt the startup process.*For first fire,HHT recommendsrunning on HI forfirst 30 minutes0-1-2-3-4+1+2+3+4ALARMONHEATSETTINGHEATSETTINGOFF HILO1. Press up arrow on thermo-stat to desired temperature.* appliance will not turn on unless targettemperature is minimum of one degreeabove room temperature.Control PanelLightDialTrim