Quadra-Fire QFI30-C Owner's Manual

Also see for QFI30-C: Owner's manual

Contents

Quadra-Fire QFI30-C Owner's Manual Manual pdf 31 page image

31Quadra-Fire • QFI30-C, QFI35-C • 2227-901 Rev. S • 2/1611 FinishingA. Mantel and Wall ProjectionsWARNING! Risk of Fire! Comply with all minimum clear-ances to combustibles as specified. Framing or finishingmaterial closer than the minimums listed must be construct-ed entirely of noncombustible materials (i.e., steel studs,concrete board, etc).Clearance to combustible material under the insert is 1/4inch (6 mm). Clearance from top of fireplace opening forcombustibles extending 12 inches max. is 12 inches.• Use leveling legs to raise insert minimum 1/4 inch (6 mm)above combustible material or outer wrap of factory builtfirebox.Combustible facings must not extend behind the insertsurround. For non-combustible material specificationsrefer to section 1.E.Figure 11.1 Clearances to Mantels or other Combustiblesabove Appliance12 IN. MIN.12 IN. MAX.EXISTING NON-COMBUSTIBLE FACING10 IN. MIN.2 IN.MAX.