Quadra-Fire QV26E Owner's Manual

Also see for VILLAGE QV26E: Installation & operating instructions

Contents

Quadra-Fire QV26E Owner's Manual Manual pdf 5 page image

Quadra-Fire • QV26E • 4038-827 Rev E • 02/05 52 Getting StartedA. Design and Installation ConsiderationsCheck building codes prior to installation.• Installation MUST comply with local, regional,state and national codes and regulations.• Consult insurance carrier, local building inspector,fire officials or authorities having jurisdiction aboutrestrictions, installation inspection, and permits.CAUTIONWhen planning a heater installation, it is necessary to deter-mine the following information before installing:• Where the heater is to be installed. See Sections3 and 4.• Electrical wiring. See Section 4.• Framing and finishing details. See Sections 3 and 6.• Whether optional accessories—devices such as a fan, wallswitch or remote control—are desired. See Section 10.Reciprocating saw Framing materialPliers Wall-finishing materialsHammer GlovesPhillips screwdriver Framing squareFlat blade screwdriver Electric drill and bitsPlumb line Safety glassesLevel Tape measureSurround1/2-3/4 in. length, #6 or #8 self-drilling screwsMisc. screws and nails• Keep heater dry.• Mold or rust may cause odors.CAUTIONC. Inspect Heater and Components• Carefully remove the heater and components from thepackaging.• Report to your dealer any parts damaged in shipment.• Read all the instructions before starting the installation.Follow these instructions carefully during theinstallation to ensure maximum safety and benefit.Fire RiskInspect heater and components for damage.Damaged parts may impair safe operation.• Do NOT install damaged components.• Do NOT install incomplete components.• Do NOT install substitute componentsReport damaged parts to dealer.WARNINGSharp Edges• Wear protective glovesand safety glasses duringinstallation.CAUTIONNote: Minimum and maximum clearances must bemaintained at all times. Illustrations throughout theseinstructions reflect typical installations and are for designpurposes only. Actual installation may vary slightly due toindividual design preferences.The illustrations and diagrams used throughout theseinstallation instructions are not drawn to scale.B. Tools and Supplies NeededBefore beginning the installation be sure the following toolsand building supplies are available: