Quadra-Fire QVI-30FB-S Owner's Manual

Quadra-Fire QVI-30FB-S Owner's Manual Manual pdf 20 page image

Quadra-Fire • QVI-30FB-S • 2020-910 Rev. H • 6/0920A. Mantel ProjectionsFigure 10.1 shows the minimum vertical and correspondingmaximum horizontal dimensions of appliance mantels orother combustible projections above the top front edge ofthe appliance, not the surround.1010 FinishingFigure 10.1 Clearances to Mantels or other Combustiblesabove ApplianceMEASUREMENTS FROMTOP EDGE OF UNIT12 in. MIN.12 in. MAX.MANTELEXHAUSTVENT PIPEINLET AIRVENT PIPEB. Installing Trim SurroundsCombustible materials MUST NEVER overlap onto thefront face.1. Find the coiled low voltage wires and ON/OFF switch at-tached to outer right side of the insert (see Figure 10.2).2. Reconnect the low voltage wires to the ON/OFFswitch.3. Attach surround assembly by hooking the supportbracket on the locating tabs on top of the gas insertfireplace (see Figure 10.2.) Once the surround assem-bly is on the locating tabs, ensure the bottom hooksare resting on the locating pins at the base. Repositionthe fireplace if necessary. Refer to surround instruc-tions provided with the decorative surround.Figure 10.2 Trim Surround InstallationFIREBOXLOCATING SLOTSLOCATING TABS