Quadra-Fire QVI-30FB-S Owner's Manual

Quadra-Fire QVI-30FB-S Owner's Manual Manual pdf 21 page image

Quadra-Fire • QVI-30FB-S • 2020-910 Rev. H • 6/09 21Figure 11.1 Placement of EmbersEMBER MATERIAL(TOP SURFACE,AND FRONT)BURNER PANAIRSHUTTER1111 Appliance SetupA. Remove Shipping MaterialsRemove shipping materials from inside or underneath thefirebox.B. Clean the ApplianceClean/vacuum any sawdust that may have accumulatedinside the firebox or underneath in the control cavity.C. AccessoriesInstall approved accessories per instructions includedwith accessories. See Service Parts List for appropriateaccessories.Shock or fire risk.Use ONLY optional accessories approved forthis appliance.• Using non-listed accessories voids warranty.• Using non-listed accessories may result in asafety hazard.• Only Hearth & Home Technologies approvedaccessories may be used safely.D. Ember PlacementExplosion Risk.• Follow ember placement instructions in manual.• Do NOT place embers directly over burner ports.• Replace ember material annually.Improperly placed embers interferes with proper burneroperation.Placing the Ember MaterialEmber material is shipped with this gas appliance. To placethe ember material:• Embers CANNOT be placed directly over ports.• When placing Glowing Embers® onto the burner careshould be taken so that the ports are not covered. Placethe dime-size ember pieces near port holes in burnertop, sides and front (see Figure 11.1). Failure to followthis procedure will likely cause lighting and sootingproblems.• Place Mystic Ember over burner surface and aroundbase of burner. Do not cover any burner port holes. Usethis material to give the appliance a realistic ash bed.• Save the remaining ember materials for use duringappliance servicing. The embers provided should beenough for 3 to 5 applications.WARNINGWARNING