Quadra-Fire YOSEMITE-MBK Owner's Manual

Also see for YOSEMITE-MBK: Installation & operation Owner's manual Owner's manual

Quadra-Fire YOSEMITE-MBK Owner's Manual Manual pdf 33 page image

Page 33Yosemite Wood StoveR7004-187LOctober 13, 20151. Remove all ash from firebox, and extinguish all hot embersbefore disposal into a metal container.2. Remove ceramic blanket and baffle together.3. With a 3/16” Allen wrench, remove the front manifold tuberetainer bolts on the air channel under the end of the fronttube. Figure 33.1.NOTE: Soak the bolts with penetrating oil for at least 15minutes before trying to remove it.4. To remove manifold tube, slide the tube to one side until oneend is out of its hole. Then, while lifting that end of the fiberboard baffle, pull tube up over the air channel and out of holeat the other end.5. Slide fiber board baffle forward to front of stove and straightout through door. Figure 33.2.6. To install the fiber board baffle, repeat steps 2 through 4 inreverse. Be sure the fiber board baffle and ceramic blanketare fully pushed back into position and the blanket is downflat. The front of the blanket should be flush with the front ofthe baffle.E. Baffl e Removal & InstallationCeramic BlanketBaffle BoardPush baffle board up slightly toallow room to turn the handleBaffle BoardFigure 33.2Figure 33.1