511010 Rev. 07-01-19 RLS Expansions 9-19. RLS Expansions9.1 IntroductionThis chapter contains installation instructions for the RLS expansion kit, which al-lows for an RLS-8560 to be expanded to an RLS-85120 by adding a new Storage Ma-trix Assembly. To replace an existing FRU (Field-Replaceable Unit), follow the in-structions in Chapter 7.9.2 Model ExpansionsThe expansion kit should take less than 10 minutes to install.Installing an expansion kit is a simple procedure:1. Remove the Storage Matrix Assembly Blank2. Install the new Storage Matrix Assembly.9.2.1 Installing a Model Expansion KitThis procedure requires one expansion kit, which includes a Right Side Storage Ma-trix Assembly either with or without an I/O port.P/N 510753-02-3 Storage Matrix Assembly Right Side with I/O PortP/N 510753-03-1 Storage Matrix Assembly Right Side without I/O PortTools Required:• No. 2 Phillips Screwdriver• 3/32 Allen Wrench (optional)• Flashlight (optional)• Small Mirror (optional)1. Remove the Storage Matrix Assembly Blank as described in Section 7.6.1.2. Once the Storage Matrix Assembly Blank has been removed, follow the steps inSection 7.5.2 to install the new Right Side Storage Matrix Assembly.
