30 Quatech QTM-8524 Manual3.3 Mounting External AntennasTo reduce potential radio interference to other users, the antenna type andits gain should be chosen so that the equivalent isotropically radiatedpower (EIRP) is not more than that required for successful communication.3.3.1 Mounting the QTM-24ANT-SWPlease refer to Figures 3.3.1.1 - 3.3.1.3 and follow the instructions below tomount your QTM-24ANT-SW antenna. Be sure to mount the antennaBEFORE connecting it to the QTM-8524 module. The QTM-24ANT-SWshould be professionally installed.Reference Description1 Molded Wall/Mast Mount2 Molded Articulating Arm3 Molded Antenna Mount4 #8-32 x 5/8 Machine Screw5 #8-32 SS/Nylon Hex Nut6 1/4-20 x 1-1/4 Machine Screw7 1/4 SS Split Lock Washer8 1/4 SS Flat Washer9 1/4-20 SS Hex NutFigure 3.3.1.1 Mounting the QTM-24ANT-SW Steps 1 - 6
