Quatech SPP-100 User Manual
Also see for SPP-100: Specifications
                                                           | |
Contents
| 
3. Windows 95/98/ME InstallationTo simplify the installation of the SPP-100 on Windows 95/98/ME basedsystems, an configuration file is provided on the distribution disk. Thisconfiguration file supports the SPP-100 in both standard printer portmode and EPP mode.3.1 Installing an SPP-100 in Windows 95/98/ME.1. Insert the SPP-100 into any available PC Card socket.2. The first time a new PC Card type is installed the NewHardware Found window opens. After this first installationWindows 95/98/ME will automatically detect and configurethe card. If the New Hardware Found window does not open,then skip to the next section, "SPP-100 Resource Settings".Figure 3. SPP-100 Driver Installation in Windows 95/98/ME3. The New Hardware Found window provides several options toconfigure the SPP-100 card. Click the Driver from Disk optionbutton. Click OK to continue.4. An Install From Disk dialog box should open. Insert theSPP-100 drivers diskette, select the correct drive letter, and clickthe OK button. Windows 95/98/ME automatically browses theroot directory for an INF file that defines configurations for theSPP-100 User's Manual 3-1 |
Related manuals for Quatech SPP-100
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine