Quest Engineering CDG 74 Installation, Operation And Maintenance Instructions
              | |
Quest CDG 74 Installation, Operation and Maintenance Instructions1-877-420-13303www.QuestHydro.cominfo@QuestHydro.comSafety PrecautionsRead the installation, operation and maintenance instructions carefully before installing and operatingthis device. Proper adherence to these instructions is essential to obtain maximum benefit from yourQuest CDG 74.READ AND SAVE THESE INSTRUCTIONS• The device is designed to be installed INDOORS IN A SPACETHAT IS PROTECTED FROM RAIN AND FLOODING.• Install the unit with space to access the back or side panels formaintenance and service. DO NOT INSTALL UNIT WITH THESERVICE PANELS INACCESSIBLE.• Avoid directing the discharge air at people, or over the water inpool areas.• If used near a pool or spa; be certain there is NO chance the unitcould fall into the water, be splashed and that it is plugged into aGFI GROUND FAULT INTERRUPT OUTLET.• DO NOT use the device as a bench or table.• DO NOT place the device directly on structural members. Providevibration isolation in order to minimize operational vibration and/ornoise.• A drain pan MUST be placed under the unit if installed abovea living area or above an area where water leakage could causedamage• If the supply cord is damaged, it must be replaced by themanufacturer, its service agent or similarly qualified person in orderto avoid a hazard. |
Related manuals for Quest Engineering CDG 74
Quest Engineering CDG 114 Installation, Operation And Maintenance Instructions
Quest Engineering 70 Installation, Operation And Maintenance Instructions
Quest Engineering 155 Installation, Operation And Maintenance Instructions
Quest Engineering DRY70 Installation, Operation And Maintenance Instructions
Quest Engineering Dry RDS 10 Installation, Operation And Maintenance Instructions
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine