Quest Engineering CDG 74 Installation, Operation And Maintenance Instructions
              | |
Quest CDG 74 Installation, Operation and Maintenance Instructions1-877-420-13304www.QuestHydro.cominfo@QuestHydro.com1. SpecificationsPart No. 4034760Power 5.5 amps, 110-120 VAC, GroundedWater 75 pints/day @ AHAM (80°F, 60%)Cord 25’ 14ga power cordProcess Air 150 CFM without external ductingRefrigerant 1 lb, 4 oz. R410aChargeOperating 33°F to 110°FRangeFilter 12” x 12” x 1” Pleated Media MERV-8DuctOptions Outlet – 10” Lay-FlatWarranty Five years;1st year 100% of Parts and Labor2nd-5th year 100% of Parts of sealedrefrigeration system.Size 30” high x 20” wide x 17” deepWeight 82 lbsPatents 7,246,5038,938,9812. OperationPlace dehumidifier inside structure, place condensate hose into a drain, or a very large container, and turn on. To decreasedrying times, make sure all windows and doors are closed to the outside and seal off the wet area from any unaffectedareas.2.1 TransportingThe Quest CDG 74 features a high-impact roto-molded housing which protects the unit airways, and while loading intovehicles. It is recommended the units are properly secured for transport. The Quest CDG 74 must always be uprightwhen transported by vehicle. It may be tipped onto its handle and back for loading and moving by hand.2.2 LocationNote the following precautions when locating the Quest CDG 74:• It is designed to be used INDOORS ONLY.• If used in a wet area, plug it into a GROUND FAULT INTERRUPTER. |
Related manuals for Quest Engineering CDG 74
Quest Engineering CDG 114 Installation, Operation And Maintenance Instructions
Quest Engineering 70 Installation, Operation And Maintenance Instructions
Quest Engineering 155 Installation, Operation And Maintenance Instructions
Quest Engineering DRY70 Installation, Operation And Maintenance Instructions
Quest Engineering Dry RDS 10 Installation, Operation And Maintenance Instructions
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine