Quest Engineering HPi110 User Manual
Also see for HPI 110: User manual
                            | |
Contents
| 
HPi110 & HPi210Quick Rig (QR) SystemsUser ManualHPi110 & HPi210 Quick Rig (QR) Systems23Mounting the Speaker & Rigging SystemMounting the QR-UB bracketConfiguring the Horn Flare Wave Guide for Horizontal InstallationThe HPi110 is equipped with a rotatable asymmetric horn flare which can be used in harmonywith the QR-UB bracket to ensure that acoustic dispersion is accurately configured to suit therequirement of the installationFor more details, consult the HPi 110 owner’s manual to set the horn flare dispersion to thehorizontal with the desired horn coverage dispersionRemove the front grill and unfasten the four screws holding the horn flare The section of the hornflare with the “Q” is the wide dispersion side and the narrow area of the horn is the long throw andmust be set to the ceiling side of the installation (if that is the area required for the HF long throw)When reattaching the horn flare, do not over tighten the screwsRemove thetop hat fromthe HPi110as well as the2 screws atthe top of thespeaker1 Replace thetop hat platewith the HPi110bracket Bottomplate2Screw in with3 of the 4screws you justunscrewed fromthe cabinet3Insert thebracket overthe speaker4Bolt it onthe bottomplate (usea long M6screw in thepackaging)5Choose your angle by placing the top screws (included in thekit) in the right holes through the rotation plate6 |
Related manuals for Quest Engineering HPI 110
manualsdatabase
Your AI-powered manual search engine