Quest Engineering HPi110 User Manual
Also see for HPI 110: User manual
                            | |
Contents
| 
HPi110 & HPi210Quick Rig (QR) SystemsUser ManualHPi110 & HPi210 Quick Rig (QR) Systems7Mounting The Speaker & Rigging SystemInstallation of the Spine on the HPi110NOTE: The 2 x M10 bolts supplied with both the i-Spine and t-Spine should replace the previouslyinstalled screws in the speaker The M10 bolts are designed with a longer thread which providesincreased strength and security to the systemRemove the 2 topscrews that areinstalled in the speakerthen insert the lip ofthe Spine to grab thecasing handle1 Swing it flat on thetop of the speaker2 Bolt in and secure(using Loctite or similarfastener securingcompound) the Spineonto the speaker withthe 2 x M10 boltsincluded3Installing an HPi110 becomes incredibly easywith the QR wall-mounting systemOnce the spine has been installed (asdescribed above) install the wall-mount asfollows:1 Bolt the wall mount assembly (withoutthe speaker attached) onto the wall2 Lift the speaker (now installed withSpine) and hook it onto the wall-mountThe wall-mount is designed to safelysupport the weight of the box from thispoint3 Set the angle by sliding the quick-pininto the right hole (see next section forangles)HPi110 withi-SpineFixed hookassembly |
Related manuals for Quest Engineering HPI 110
manualsdatabase
Your AI-powered manual search engine