Quest Engineering Q Motion Series User Manual

Contents

Quest Engineering Q Motion Series User Manual Manual pdf 5 page image

QM350iUser ManualUser ManualQ Motion SeriesQM350i3General DescriptionThe QM350i is a passive two way bassreflex design speaker suitable for mobile orinstallation use. The design characteristics ofthe QM350i make it suitable for both full rangeuse or as the high-mid component of a multiway system with sub-bass enhancement.The new generation neodymium highfrequency transducer is matched to arotatable asymmetrical wave guide that canbe rotated through 270 degrees for horizontal,vertical or fold-back monitor installation.The asymmetrical coverage allows the hornto achieve both long throw performanceand wide angle close coverage without“hot zones” or adding to unnecessary roomreflections that can degrade vocal intelligibil-ity. The unit can be used in a stand aloneconfiguration or as part of a system coupledwith any Quest sub-bass system. When usedin conjunction with these devices, the QM350iwill form part of a high performance multiway audio system.InstallationTemporary installation is possible with the35mm floor stand mounting in the base ofthe enclosure. Fold-back installation can giveextra uniform stage performance by rotatingthe horn flare to the “fold-back” position.Five M 8 thread inserts are located on the top,sides and one under the QM350i enclosure.These are intended to be used with theWB350i wall bracket.QM Range Flying AccessoriesTwo rigging accessories are available for theQM350i:WB 350i Wall bracket kitQB450 Protective transit coverFunctional DesignThe QM350i features an asymmetricalhorizontal angle along one side which makesit suitable for use as a stage\foldback wedgewhen laid flat. The QM350i can be easilymaneuvered across a stage or down a loadingramp by one person.Solid Build ConstructionThe QM350i is well suited to all professionalapplications. The synthetic casing is speciallyformulated to withstand demanding useand the heavy gauge power-coated steelgrill ensures the driver and horn are alwaysprotected.WARNING Flying the box from one insert must not be attempted! Improperinstallation may result in damage, injury or death.