QuiQue's Aircraft Yak-54S Assembly Manual
Also see for Yak-54S: Assembly manual
                                             | |
Contents
| 
Section 3-Vertical Fin InstallationFigure 7Step 9Place the fuse so the H. Stab isvertical so the thin C/A glue will flowinto the fuse sides.Apply the thin C/A glue along the H.Stab on both sides that do not havethe tooth pick wedges. Let the thinC/A set up and then apply somemore thin C/A on the sides with thetoothpick wedges. Be careful not toglue the toothpicks in place, as youwill of course remove them as soonas the thin C/A sets up.Step 10Remove the toothpick wedges.Apply a fillet of medium C/A over allof the areas between the fuse sidesand the H. stab. If there is a smallgap, simply work more of the thickC/A into the small gaps.Required Tools and Adhesive• Acetone• Xacto knife, #11 Blade• Felt tip marker• 30-minute epoxy• Alcohol Swab/Alcohol andpaper towel• Round toothpick• White glueStep 1Insert the Vertical Fin in the fuse.Mark a line along the V. Fin andfuse. See Figure 8.Figure 8Step 2Mark another line about ¼ or an inchbelow the first line that you drew.11 |
Related manuals for QuiQue's Aircraft Yak-54S
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine