QL-800 Maintenance Utility54 QL-800 User Guide4 Enter a horizontal baseline value.In the following illustration, a label is exiting the printer. Note the positive andnegative adjustment directions.5 To save the horizontal baseline value, choose Save to Printer.Setting the Cut/Stop PositionThe cut/stop position setting adjusts the position at which media is fed after printing.You can adjust the cut/stop position -20 to +20 mm.1 Launch the QL-800 Maintenance Utility.From the Windows Start Menu, choose Start > All Programs > QuickLabelQL-800 > QL-800 Maintenance Utility. A language and printer prompt will open.Select a display language and the QL-800 printer you want to connect to. ChooseOK.2 Choose the Print Settings tab.3 To read the cut/stop position value from the printer and set the Cut/Stop Positioncontrol accordingly, choose Read From Printer.4 Enter a cut/stop position value.• Positive values result in more media being fed after printing before the mediastops.• Negative values result in less media being fed after printing before the mediastops.5 To save the cut/stop position values, choose Save to Printer.
