13Safety Display WarningIf you forget to lock the freewheel device and try to use the scooter you will see thisindication (as circled) on the display:The spanner means there is a fault and the number 5 means the freewheel is not lockedand the scooter will not drive,To clear the fault:1. Turn the ignition off and get off the scooter immediately.2. Lock the freewheel device as shown on Page 12.3. Turn on the ignition, the spanner and the number 5 will disappear.4. The scooter will now operate correctly.Another common rider fault is pulling in the throttle lever mechanism (Page 10) at thesame time when turning on the ignition. The scooter will see a fault and the spanner withthe number 6 will show on the display. Simply release the lever for a few seconds and thescooter will automatically reset.You can now drive off.The full list of fault numbers can be viewed on Page 27